Reduces Chlorine, volatile organic compounds (VOCs), chlorinated hydrocarbons, sediment, rust, particulates, and organic impurities from treated municipal drinking water. Not designed for well water or micro-biologically contaminated water.
The 1st stage 4-1/2" x 10" pleated 1 micron sediment filter removes sediment and larger particles and pre-filters the
incoming water to extend the life of the 2nd stage solid Carbon Block filter.
All at a cost of way less than a penny per gallon!
Everything you need for installation. We recommend a professional plumber for install.
Inlets and outlets are large 1" ports (3/4" ports available) and
the system comes with built-in pressure relief valves in each of the
housing caps to help relieve water pressure and simplify filter changes.
Replacement filters are: $24.88 each for the 1 micron pleated Sediment Filter (WR013) and $70.52 for the Carbon Block Replacement Filter (WR011). Total Retail price: $529.00. Save over $240.00. Ships FREE in the continental U.S.
You can expect 5 to 7 GPM (Gallons per Minute) of flow with one WD002 whole house water filter system, certainly adequate for most homes, i.e. 3-4 bedrooms, 2-3 baths.
If you have more than 3,500 sq. ft. of living space or more than 3.5 baths, we would recommend installing two of these filter systems in parallel. WD002 and achieve a flow rate of 8 to 14 GPM.